Chapter 14.60
FIRE HYDRANTS
Sections:
14.60.030 Temporary service supply permit.
14.60.040 Removal or relocation procedure.
14.60.010 Use restricted.
Fire hydrants are provided for the sole purpose of extinguishing fires and are to be opened and used only by city or authorized personnel. (Ord. 273 (part), 1985)
14.60.020 Opening method.
A person authorized to open fire hydrants shall use an approved spanner wrench and shall replace the caps on the outlets when not in use. (Ord. 273 (part), 1985)
14.60.030 Temporary service supply permit.
If temporary service is supplied through a fire hydrant, a permit for the temporary service shall be obtained from the commercial office. The permit shall be exhibited upon the work while water is taken. The city engineer shall approve the permit. (Ord. 273 (part), 1985)
14.60.040 Removal or relocation procedure.
A. Any person who desires the removal or change in location of a fire hydrant shall make request in writing to the water system. If the fire chief approves the proposed removal or relocation, the city shall prepare an estimate of the cost of the proposed work. The person requesting the removal or relocation shall first deposit an amount equal to the estimated cost with the commercial office before the city starts work. Upon completion of the work, the actual cost shall be compiled and any difference between the actual and estimated cost shall be billed or refunded for the applicant’s account.
B. If the hydrant is outside the city limits, the applicant shall obtain written approval from the fire district having jurisdiction over it. (Ord. 273 (part), 1985)