CHAPTER 17.13
DESIGNATION OF ZONES AND DISTRICTS

17.13.010 List of Zones

The following zones are established in order to carry out the purpose of this Ordinance:

A-1    (Light Agriculture)

R-1    (Single Family Residential)

R-2    (Medium Residential)

R-3    (Multiple Residential)

C-1    (Light Commercial)

C-2    (Office Commercial)

C-3    (General Commercial)

C-4    (Commercial Center)

C-5    (Service Commercial)

C-D    (Downtown Commercial) (Zoning Ordinance Amendment 98-1, adopted by City Council March 10, 1999.)

M-1    (Light Industrial)

M-2    (General Industrial)

M-3    (Airport Industrial)

M-4    (Planned Industrial)

PF    (Public Facilities)

QR    (Quarry and Reclamation)

MX    (Mixed Use Transitional)

OR    (Open Space and Recreation)

17.13.020 Suffixes to Symbols

The following additional symbols are established in order to carry out the purpose of this Ordinance:

A.    Units per acre of net area

The letter “U” in combination with a numeral shall specify the density per net acre when used as a suffix to a zoning symbol. In no case shall a density figure be rounded up.

B.    Minimum lot size

1.    A numeral following the zone designation shall specify the minimum lot size permitted. Where this numeral is over one thousand (1,000), the designated lot size shall signify square feet. Where less than one thousand (1,000), the designated lot size shall signify acres.

2.    In all cases, the minimum lot size specified by the zoning designation shall mean net lot area, excluding dedications for right-of-way and easements.

C.    Notwithstanding any provision contained in this Section, in no case shall the density allowed on any lot exceed that permitted by the underlying General Plan designation for the property.