Chapter 17.34
OFFICE (O) ZONE

Sections:

17.34.010    Purpose and application.

17.34.020    Property development standards.

17.34.010 Purpose and application.

The O zone is intended to provide for offices and related functions close to medical facilities and the downtown, convenient to public transportation and related government and business services. The O zone is also intended to provide for continuation and development of residential uses where they will be compatible with neighboring offices. The O zone implements and is consistent with the office land use category of the general plan. (Ord. 1438 § 1 (part), 2003: Ord. 941 § 1 (part), 1982: prior code § 9203.6(A))

17.34.020 Property development standards.

The property development standards for the O zone are as follows:

A. Maximum density: Twelve dwelling units per net acre (see also Section 17.16.010).

B. Yards: See Section 17.16.020.

C. Maximum height: Twenty-five feet; thirty-five feet with the approval of an administrative use permit in compliance with Section 17.22.010, Table 9, Footnote 1 (also see Sections 17.16.020 and 17.16.040).

D. Maximum coverage: Sixty percent (see also Section 17.16.030).

E. Maximum floor area ratio: The ratio of gross building floor area to site area shall not exceed 1.5.

F. Standard Lot Dimensions.

1. Minimum lot area: Five thousand square feet.

2. Minimum lot width: Fifty feet.

3. Minimum lot depth: Eighty feet.

4. Minimum street frontage: Twenty feet.

G. Parking requirements: See Section 17.16.060. (Ord. 1500 § 3 (part), 2007; Ord. 1365 § 3 (part), 2000: Ord. 1088 § 1 Ex. A(4), 1987; Ord. 941 § 1 (part), 1982: prior code § 9203.6(B))