Chapter 15.24 MECHANICAL CODE

Chapter 15.24
MECHANICAL CODE

Sections:

15.24.010 Adoption of International Mechanical Code.

15.24.020 Amendments to International Mechanical Code.

15.24.010 Adoption of International Mechanical Code.

The International Mechanical Code, 2018 Edition, promulgated by the International Code Council, Inc., together with amendments set forth below (hereafter “IMC” or “International Mechanical Code”) is hereby adopted to regulate the design, construction, quality of materials, erection, installation, alteration, repair, location, relocation, replacement, addition to, use and maintenance of mechanical systems within the jurisdiction.

(Ord. 4829, 1-16-19; Ord. 4499, 2-13-12; Ord. 4013, 1-3-07; Ord. 3318, 12-6-00. Code 1994 § 8-56)

State law reference(s) – Copies to be kept in office of the clerk, § 31-16-206, C.R.S.

15.24.020 Amendments to International Mechanical Code.

The mechanical code adopted in GJMC 15.24.010 is hereby amended as follows:

(a) Section 106: 106.5.2, Fee schedule, is amended by deleting as written and replacing with the following:

Fees shall be as determined by City Council and set forth in a Resolution.

(b) Section 106: 106.5.3, Fee refunds, is deleted as written and replaced with the following:

Building permit fees may be refunded at the rate of 85% of the building permit fee provided the project for which the permit was issued has not commenced and/or inspections have not been conducted. No refunds will be made after work has commenced or after 180 days of issuance.

Any person who violates a provision of this code or fails to comply with any of the requirements thereof shall be subject to penalties as prescribed in GJMC 15.08.050.

(d) Section 109: 109, Means of appeal, is amended by deleting as written and replacing with the following:

The Board of Appeals established in GJMC 15.08.010 shall serve as the Board of Appeals.

(Ord. 4829, 1-16-19; Ord. 4013, 1-3-07; Ord. 3318, 12-6-00; Ord. 2812, 2-15-95. Code 1994 § 8-57; Code 1965 § 7-81(d))