6.110A.030 Development inspection fees.

Fees for those development inspection activities contained in Table 6.110A.030 shall be collected prior to inspection:

Table 6.110A.030—Development Inspection Fees 

Section				Activity		Fee
1				Planning Fees
	A			Wetland1
		I			Request release of performance assurance	79
		II			Request release of maintenance assurance	103
		III			Monitoring inspection/permit
			a		First year	600
			b		Subsequent years	300
	B			Habitat
		I			Monitoring inspection/permit
			a		First year	600
			b		Subsequent years	300
2				Engineering Fees
	A			Critical Aquifer Recharge Area Permit (CARA) Category I Only
		I			Type 1 site plan inspection	590
		II			Type 2 site plan inspection	870
	B			Drainage Project
					Stormwater inspection fee	831
	C			Grading Permit – Inspection
		I			100 c.y. or less	254
		II			over 100 to 10,000 c.y.	862
		III			over 10,000 c.y.	2,028
	D			Grading Permit – Surcharge
		I			Activity lasts 6 to 12 months beyond issuance date	16%
		II			Activity lasts 12 or more months beyond issuance date	32%
		III			Activity lasts months beyond permit time, surcharge in A or B above as applicable, plus penalty of	8%
		IV			Work without permit	Double fee
		V			Review of engineered grading report	386
	E			Inspection – Stormwater and Transportation
					Inspection per hour after normal work hours and any reinspection (regardless of time of day)3	Actual salary and benefits for employees performing work plus overhead at a rate of 30%
	F			Shoreline Inspection		278
	G			Short Plat
		I			Inspection – Stormwater	2,068
		II			Inspection – Transportation	2,068
		III			Rural driveways	265
	H			Site Plan
					Transportation and stormwater
		I	a		Base fee – Small projects (less than 1.0 acre of impervious surface2)	1,520
			b		Per sq. ft. fee – Small projects (less than 1.0 acre of impervious surface2)	0.0204
		II	a		Base fee – Medium projects (1.0 acre to 4.99 acres of impervious surface2)	3,041
			b		Per sq. ft. fee – Medium projects (1.0 acre to 4.99 acres of impervious surface2)	0.0100
		III	a		Base fee – Large projects (over 5.0 acres of impervious surface2)	6,086
			b		Per sq. ft. fee – Large projects (over 5.0 acres of impervious surface2) [maximum base fee + per sq. ft. fee $11,000]	0.0039
		IV			Unoccupied commercial and utility structures – Base fee	507
		V			Tenant improvements	152
		VI			Final site plan inspection	507
	I			Subdivision (all sizes)
					Stormwater
		I			Base fee	1,409
		II			Per lot fee	140
					Transportation
		III			Base fee	4,440
		IV			Per lot fee	39
	J			System Integrity Review
					Maintenance warranty	878
					Stormwater system failure – Engineering review	1,285

Notes:

1    The director may waive a part or all of the wetland permit fees for wetland and buffer enhancements, provided (1) the project is not intended to mitigate for wetland buffer impacts, and (2) the project is not the result of an enforcement action.

2    Impervious surface is defined in Section 40.100.070, Clark County Code.

3    Cost recovery—Contractor will be required to sign an agreement that they will pay actual costs of the inspection. Actual costs will be salary and benefits for employees performing work plus overhead at the rate of thirty percent (30%). The contractor will be sent an itemized billing.

4    For review of projects authorized for overtime, an additional fifty percent (50%) will be added to the permit fees, as applicable.

(Sec. 3 (Exh. A) of Ord. 2001-12-09; amended by Sec. 1 (Exh. A) of Ord. 2002-11-07; amended by Sec. 1 (Exh. A) of Ord. 2004-02-09; amended by Ord. 2004-12-02; amended by Ord. 2005-12-01; amended by Sec. 2 of Ord. 2006-05-27; amended by Sec. 1 of Ord. 2007-04-17; amended by Sec. 1 of Ord. 2007-11-13; amended by Sec. 1 of Ord. 2008-02-01)