Chapter 17.20
DENSITY AND DIMENSIONAL REQUIREMENTS

Sections:

17.20.010    Purpose.

17.20.020    Interpretation of table.

17.20.030    Table of density and dimensional requirements.

17.20.010 Purpose.

The purpose of this chapter is to establish requirements for development relative to residential density and basic dimensional standards, as well as specific rules for general application. The standards and rules are established to provide flexibility in project design and maintain privacy between adjacent uses. (Ord. 1047 §§2(part), 3(part), 2004).

17.20.020 Interpretation of table.

A.    Section 17.20.030 contains the maximum density and minimum dimensional standards for land use districts.

B.    The table is arranged as a matrix format showing the required standard by land use districts. Development standards are listed down the left side of the table and the zones are delineated across the top. The matrix cells contain the maximum density or minimum dimensional requirements for each land use district. A blank box indicates that there are no specific requirements or the provisions of the Uniform Building Code apply. The presence of a letter accompanying a number means there are special development limitations or conditions. The development limitation with the corresponding letter immediately follows the table. (Ord. 1047 §§2(part), 3(part), 2004).

17.20.030 Table of density and dimensional requirements.

Development Standard

G-R

R-R

C-1

C-2

C-3

I

Maximum Density (Dwelling Units Per Acre)

 

 

 

 

 

 

Single-family

6

4.4

 

6

 

 

Designated manufactured home

6

 

 

6

 

 

Manufactured home

 

 

 

 

 

 

Multifamily, 2 to 4 units

9

 

9

9

 

 

Multifamily, 5 or more units

16

 

 

16

 

 

Minimum lot area in square feet

6,250

10,000

2,500

6,250

10,000

10,000

Minimum lot width in feet

50

100

25

50

100

100

Maximum lot coverage in square feet

50%

 

 

50%

 

 

Yard requirements in feet

 

 

 

 

 

 

Front yard

20

15

 

20

 

 

Rear yard

15

25

 

15

 

 

Rear yard abutting an alley

 

 

5

 

 

 

Rear yard abutting residential district

 

 

25

 

25

25

Side yard

7

7

 

7

 

 

Side yard abutting a street

15

15

 

15

 

 

Side yard abutting a residential district

 

 

10

 

10

10

Maximum building height in feet

32

32

45

32

75

75

(Ord. 1195 §2 (Att. A), 2021; Ord. 1047 §§(part), 3(part), 2004).