Chapter 17.20
MULTIFAMILY ZONE (MPR-MF)
Sections:
17.20.040 Height restrictions.
17.20.050 Bulk and dimensional requirements.
17.20.010 Purpose.
This zone recognizes, maintains and promotes multifamily housing opportunities within the MPR, in part to provide lower-cost housing units. [Ord. 8-99 § 3.301]
17.20.020 Permitted uses.
The following uses are permitted within the MPR-MF zone:
(1) Multifamily dwelling units including condominiums;
(2) Assisted living, congregate care, and long-term care facilities;
(3) Accessory uses and structures, such as garages, carports, storage buildings, pools, and recreation buildings supporting the residential environment, when clearly subordinate and supplemental to a permitted use;
(4) Home-based business;
(5) Trails, parks, open space and playgrounds approved through a platting or development review process;
(6) Single-family attached (townhouse style) or detached dwelling units. [Ord. 8-99 § 3.302]
17.20.030 Conditional uses.
The following uses are permitted conditionally in the MPR-MF zone:
(1) Trails, parks, open space and playgrounds if not part of a platting or development review process;
(2) Above-ground electrical substations, sewage pump stations and treatment plants, and potable water tanks or storage facilities. [Ord. 8-99 § 3.303]
17.20.040 Height restrictions.
No building or structure shall be erected, enlarged or structurally modified to exceed 35 feet in height as measured by UBC standards. [Ord. 8-99 § 3.304]
17.20.050 Bulk and dimensional requirements.
Bulk and dimensional requirements shall be as provided in Table MPR-MF. Single-family residential uses are subject to the requirements of Chapter 17.10 JCC; provided, that conditional use approval shall not be required for single-family attached development. [Ord. 8-99 § 3.305]
Table MPR-MF
|
Density |
Minimum Lot Area |
Minimum Lot Width |
Front Yard Setback |
Side Yard Setback |
Rear Yard Setback |
Maximum Impervious Coverage |
|---|---|---|---|---|---|---|
|
10 DU/AC |
N/A |
N/A |
UBC |
UBC |
UBC |
55% |