Chapter 17A.110
INDUSTRIAL (IN)

Sections:

17A.110.010    Purpose of classification.

17A.110.020    Permitted uses.

17A.110.030    Conditional uses.

17A.110.040    Accessory uses.

17A.110.050    Lot area and width.

17A.110.060    Density.

17A.110.070    Property line setbacks.

17A.110.080    Height.

17A.110.090    Lot coverage.

17A.110.100    Parking.

17A.110.110    Special provisions.

17A.110.010 Purpose of classification.

The purpose of this district is to provide development options, within industrial areas, which are consistent with Okanogan County’s comprehensive plan. (Ord. 2016-4 § 1 (Att. A), 2016).

17A.110.020 Permitted uses.

Permitted uses are as indicated on the district use chart (see Chapter 17A.220 OCC). (Ord. 2016-4 § 1 (Att. A), 2016).

17A.110.030 Conditional uses.

Conditional uses are as indicated on the district use chart (see Chapter 17A.220 OCC). (Ord. 2016-4 § 1 (Att. A), 2016).

17A.110.040 Accessory uses.

Accessory uses are as follows:

A. Normal accessory uses customary and incidental to the permitted and/or conditional use of the property;

B. One attached or detached dwelling unit for employee housing, and/or the manager, and/or the night watchman shall be permitted on the same site as the business. (Ord. 2016-4 § 1 (Att. A), 2016).

17A.110.050 Lot area and width.

Lot area and width requirements are as follows:

A. The minimum lot area is 10,000 square feet.

B. The minimum lot width is 50 feet. (Ord. 2016-4 § 1 (Att. A), 2016).

17A.110.060 Density.

Density restrictions are as follows:

A. Maximum floor area equals lot area, subject to setbacks in OCC 17A.110.070. (Ord. 2016-4 § 1 (Att. A), 2016).

17A.110.070 Property line setbacks.

All permitted structures shall have the following required property line setbacks:

A. Front: 25 feet;

B. Side: none, except minimum is 25 feet when abutting a residential or agricultural land district;

C. Rear: none, except minimum is 25 feet when abutting a residential or agricultural district. (Ord. 2016-4 § 1 (Att. A), 2016).

17A.110.080 Height.

Height restrictions are as follows:

A. Maximum height is 65 feet, unless the manufacturing process requires a taller structure. (Ord. 2016-4 § 1 (Att. A), 2016).

17A.110.090 Lot coverage.

Lot coverage restrictions are as follows:

A. Maximum lot coverage is 70 percent. (Ord. 2016-4 § 1 (Att. A), 2016).

17A.110.100 Parking.

Parking requirements are as indicated in Chapter 17A.240 OCC. (Ord. 2016-4 § 1 (Att. A), 2016).

17A.110.110 Special provisions.

Reserved. (Ord. 2016-4 § 1 (Att. A), 2016).