4-5-030 MANUFACTURED/MOBILE HOME AND PARK INSTALLATION:

A. CONSTRUCTION OF MANUFACTURED OR MOBILE HOME PARKS – PERMITS REQUIRED:

In the construction of mobile home parks, the developer shall obtain a building permit consistent with all applicable State, County and City codes for electrical, plumbing, sanitary sewer, storm sewer, fire, street, building and all other applicable codes. A building permit for a mobile home park shall include but is not necessarily limited to the site, its grading and preparation, private utilities and services, private on-site streets, driveways, walkways and landscaping, the dimensions of the individual mobile home sites and the design and construction of the individual mobile home pads and their utility connections. Public utilities and on- or off-site public street improvements as defined in subdivision regulations and public or private sewer, water and storm drainage systems will require a permit from the Development Services Division. (Ord. 3746, 9-19-1983)

B. INDIVIDUAL MOBILE/MANUFACTURED HOME INSTALLATION:

1. Installation Permit Required: An installation permit from the Development Services Division shall be required for installation of each manufactured/mobile home and to connect to utilities. An installation permit shall not be issued for the location of any mobile home unless the mobile home park has been issued an occupancy certificate and a license from the Building Official.

2. Installation Requirements: All mobile home installations shall comply with chapter 296-150M WAC, entitled Manufactured Homes. Setbacks, lot coverage and related requirements shall be completed and approved and issued prior to the occupation of each mobile home.

3. Insignia Required: Mobile homes constructed after July 1, 1968, shall bear the insignia of approval for plumbing, heating and electrical installation according to chapter 43.22 RCW. (Ord. 3746, 9-19-1983; Ord. 6010, 1-25-2021)