Division 13-16-006
Pavement Markings

Sections:

13-16-006-0001    Longitudinal Pavement Markings

13-16-006-0002    Transverse Markings, Symbols, and Legends

13-16-006-0001 Longitudinal Pavement Markings

A.    Permanent pavement markings shall be installed in accordance with ADOT Standard Specification 708.

B.    Temporary longitudinal pavement markings, when approved, shall be installed in accordance with ADOT Standard Specification 701-3.05. (Ord. 2017-22, Rep&ReEn, 07/05/2017; Ord. 2020-10, Amended, 09/15/2020 (Res. 2020-13))

13-16-006-0002 Transverse Markings, Symbols, and Legends

A.    This section applies to shoulder markings, word and symbol markings, arrows, stop lines, yield lines, crosswalk lines (other than at Arizona school crosswalks as defined in Arizona Revised Statutes), speed measurement markings, speed reduction markings, speed hump markings, parking space markings, and other similar markings.

B.    Permanent markings shall be either:

1.    Dual component markings (epoxy) installed in accordance with ADOT Standard Specification 709; or

2.    Preformed markings installed in accordance with ADOT Standard Specification 705 Type I (may only be used if total project marking quantity is less than three hundred (300) square feet).

C.    Temporary markings, when approved, shall be either:

1.    Preformed markings installed in accordance with ADOT Standard Specification 705 Type II; or

2.    Preformed markings installed in accordance with ADOT Standard Specification 705 Type III. (Ord. 2017-22, Rep&ReEn, 07/05/2017; Ord. 2020-10, Amended, 09/15/2020 (Res. 2020-13))